Call us now ! Send us an email N Fountain Way Anaheim United States

Back to Top

Serving Orange County
& Surrounding Areas

4 Tips for Fixing Up Your Old Motorcycle on a Budget

Vintage Motorcycle In An Old Hangar Against A Wall With Deer Antlers
Do you have an old motorcycle that has been sitting in the garage for a while? If so, it's likely showing signs of wear and tear. Alternatively, you might have purchased a cheap, old motorcycle and have to repair it before you can start riding it. Either way, you're probably wondering if it's possible to fix up your bike without spending a lot of money.

You can easily spend a lot of money on motorcycle repairs, but you don't have to. These are a few tips that can help you fix your motorcycle for less.

1. Try Metal Plating on Old Parts

First of all, you could be worried about the condition of some of the metal parts on your bike. If the rims or other metal parts are starting to look scratched or otherwise damaged, you might think that you will have to replace them. Of course, buying all new parts can drive up the cost of your motorcycle renovation. Luckily, you may be able to avoid this expense.

Instead, consider metal plating for your wheels or other parts. During this process, a professional can clean off your wheels, get rid of scratches and imperfections, and then add a new finish. This method is a good way to repair old wheels and parts and make them shine like new again. It's generally also much cheaper than completely replacing them.

2. Look for Used Parts

Another tip that can help you save money on fixing up your older motorcycle is to look for used parts when possible. Naturally, you will generally pay much less for used motorcycle parts than you would pay for brandnew parts. In fact, you might be surprised by how much you can save by buying used.

Of course, you should take some precautions when buying used parts. First of all, you will want to buy from a reputable dealer or individual. You'll also want to make sure that the parts are in good condition; after all, you don't want to purchase parts that might break down soon after you install them. Making sure that they are a proper fit for your motorcycle's make and model is also essential.

In some cases, you may also be able to find used motorcycle parts that have a warranty. If this is an option, you can save money by buying used parts while still enjoying peace of mind.

3. Buy Aftermarket Motorcycle Parts

If you don't want to purchase used parts, or if you aren't able to find the used parts that you need, you should not assume that you have to shell out the cash for manufacturer-specific parts. Instead, consider looking for aftermarket parts. Many parts manufacturers sell aftermarket parts that fit on various makes and models of motorcycles. These parts are often much cheaper than OEM parts.

4. Learn to Do the Work Yourself

Of course, as with a car, you are going to pay more if you have to pay someone else to work on your motorcycle. If you take the time to learn how to make certain repairs yourself, however, you can save money over hiring a professional for each repair. Plus, you might find that you will pick up a fun new hobby by learning how to work on your own motorcycle.

As you can see, you don't have to spend a ton of money just to fix up an old motorcycle. Instead, follow these simple tips, and you can get your old motorcycle up and running for less than you probably think. For metal plating services, reach out to our experts at Platinum Surface Coating.

Contact Information

Platinum Surface Coating
1179 N. Fountain Way
Anaheim, CA 92806

Phone: 714-495-2604
Phone: 714-603-7758
Fax: 657-230-9377

Business Hours:

Closed, Sunday

Payment Options